Παρασκευή 13 Φεβρουαρίου 2026

ΣΙΔΕΡΟ ΔΙΑΚΟΣΜΗΜΕΝΟ ΜΕ ΕΙΚΟΝΕΣ ΑΠΟ ΦΡΑΟΥΛΕΣ (IRON DECORATED WITH STRAWBERRY IMAGES)

 


¨Ενα παλιό σίδερο άλλαξε όψη ως εξής:

  • Πριν από κάθε επεξεργασία το σίδερο είχα βατεί σε χρυσό χρώμα μέσα έξω, εκτός από τοξύλινο χερούλι και το ξύλινο κουμπί κλεισίματος που είχαν βαφεί με κόκκινο χρώμα.
  • Τα ξύλινα μέρη καλύφτηκαν με χαρτοταινία.

  • Το εξωτερικό πλάγιο μέρος  καθώς & το καπάκι καλύφτηκε με ένα στρώμα κρακελέ του ενός συστατικού. 
  • Μετά το στέγνωμα καλύφτηκαν αυτά τα σημεία με λευκό ακρυλικό χρώμα με χρήση σφουγγαριού, ετός από το καπάκι που καλύφτηκε με μαύρο χρώμα .
  • Μέσα & έξω έγινε decoupage με εικόνες σκισμένες από χαρτοπετσέτα.
  • Με κουκκίδες από πορτοκαλί ακρυλικό χρώμα & χρήση στένσιλ έγιναν οι κουκκίδες στο καπάκι καθώς και ακανόνιστες γραμμές στο άνω μέρος του καπακιού..
  • Μέσα & έξω το σίδερο καλύφτηκε με ένα στρώμα λούστρου νεφτιού.
  • Αφαιρείται η χαρτοταινία.
  • Τέλος στο κάτω μέρος κολλήθηκε τσόχα για να μπορεί το σίδερο να τοποθετηθεί πάνω σε έπιπλο χωρίς να το φθείρει.
  • Στο εσωτερικό του μπορούν να τοποθετηθούν αποξηραμένα αρωματικά στοιχεία & μπορεί επίσης να μείνει ανοιχτό.


An old iron changed its appearance as follows:
    Before any treatment, I had painted the iron gold inside and out, except for the wooden handle and the wooden closing button which were painted red.
    • The wooden parts were covered with paper tape.
    • The outer side and the lid were covered with a layer of one-component crackle paint.
    • After drying, these areas were covered with white acrylic paint using a sponge, except for the lid which was covered with black paint.
    • Inside & outside, decoupage was done with images torn from a paper towel.
    • With dots of orange acrylic paint & using a stencil, the dots on the lid as well as irregular lines on the upper part of the lid were made.
    • Inside & outside, the iron was covered with a layer of kerosene varnish.
    • The paper tape is removed.
    • Finally, felt was glued to the bottom so that the iron can be placed on furniture without damaging it.
    • Dried aromatic elements can be placed inside & it can also be left open.

    Τρίτη 10 Φεβρουαρίου 2026

    Δευτέρα 9 Φεβρουαρίου 2026

    ΜΕΤΑΜΟΡΦΩΣΗ ΣΙΔΕΡΟΥ ΜΕ ΕΙΚΟΝΕΣ ΜΕ ΛΕΜΟΝΙΑ (TRANSFORMATION OF IRON WITH LEMON IMAGES)

     


     Ένα παλιό σίδερο σιδερώματος άλλαξε όψη για να γίνει διακοσμητικό στοιχείο ως εξής:

    • Πρώτα αφού καλύφτηκαν με χαρτοταινία τα ξύλινα μέρη έγινε ψέκασμα με  αντισκωριακό spray   σε σκούρο  κόκκινο χρώμα μέσα-έξω.
    • Στο  στο κάτω μέρος  & στα   πλαϊνά εφαρμόστηκε  κρακελέ των δύο συστατικών.
    • Στα σημεία που εφαρμόστηκε το κρακελέ  τοποθετήθηκε λευκό ακρυλικό χρώμα ώστε να εμφανιστούν λεπτές ρωγμές.
    • Μετά έγινε decoupage με εικόνες  λεμο νιών σκισμένες από χαρτοπετσέτα.
    • Με ακυλικά χρώματα τελειοποιήθηκαν οι εικόνες,  
    • Μέσα & έξω το σίδερο καλύφτηκε με ένα στρώμα λούστρου νερού περασμένο με πινέλο.
    • Με  κουκίδες από conture(relief) τονίστηκαν μερικά σημεία στα πλαγια και με ακατάστατες γραμμές στην πάνω επιφάνεια.
    • Μέσα & έξω το σίδερο καλύφτηκε με ένα στρώμα λούστρου σε spray.
    •  Τέλος στο κάτω μέρος κολλήθηκε τσόχα για να μπορεί το σίδερο να τοποθετηθεί πάνω σε έπιπλο χωρίς να το φθείρει.

    An old ironing iron was transformed into a decorative element as follows:
    • First, after the wooden parts were covered with paper tape, it was sprayed with anti-rust spray in dark red color inside and out.
    • Two-component crackle was applied to the bottom and sides.
    • White acrylic paint was applied to the areas where the crackle was applied so that fine cracks appeared.
    • Then, decoupage was done with images of lemons torn from a paper towel.
    • The images were perfected with acrylic paints,
    • Inside & outside the iron was covered with a layer of water-based glaze applied with a brush.
    • Dots of contour (relief) were used to highlight some points on the sides and with messy lines on the upper surface.
    • Inside & outside the iron was covered with a layer of spray glaze.
    • Finally, felt was glued to the bottom so that the iron could be placed on furniture without damaging it.

    Κυριακή 1 Φεβρουαρίου 2026

    ΜΕΤΑΜΟΡΦΩΣΗ ΣΙΔΕΡΟΥ ΜΕ ΑΧΝΕΣ ΕΙΚΟΝΕΣ (TRANSFORMATION OF IRON WITH SILENT IMAGES)




     Ένα παλιό σίδερο σιδερώματος άλλαξε όψη για να γίνει διακοσμητικό στοιχείο ως εξής:

    • Πρώτα αφού καλύφτηκαν με χαρτοταινία τα ξύλινα μέρη έγινε ψέκασμα με  αντισκωριακό spray   σε σκούρο  κόκκινο χρώμα μέσα-έξω.
    • Στο  στο κάτω μέρος  & στα   πλαϊνά εφαρμόστηκε  κρακελέ των δύο συστατικών.

    • Το εξωτερικό καπάκι  που είχε τραχειά επιφένεια βάφτηκε με μαύρο ακρυλικό χρώμα.
    • Στα σημεία που εφαρμόστηκε το κρακελέ  τοποθετήθηκε λευκό ακρυλικό χρώμα ώστε να εμφανιστούν λεπτές ρωγμές.
    • Μετά έγινε decoupage με εικόνες σκισμένες από χαρτοπετσέτα.
    • Με ακυλικά χρώματα τελειοποιήθηκαν οι εικόνες,  
    • Μέσα & έξω το σίδερο καλύφτηκε με ένα στρώμα λούστρου νερού περασμένο με πινέλο.
    • Με  κουκίδες από conture(relief) τονίστηκαν μερικά σημεία στα πλαγια και με ακατάστατες γραμμές στην πάνω επιφάνεια.
    • Μέσα & έξω το σίδερο καλύφτηκε με ένα στρώμα λούστρου σε spray.
    •   Τέλος στο κάτω μέρος κολλήθηκε τσόχα για να μπορεί το σίδερο να τοποθετηθεί πάνω σε έπιπλο χωρίς να το φθείρει.
    • Το σίδερο μπορεί να τοποθετηθεί & ανοιχτό  γεμάτο με αρωματικό ποτ-πουρί.

    An old ironing iron was transformed into a decorative element as follows:

    • First, after the wooden parts were covered with paper tape, it was sprayed with anti-rust spray in dark red color inside and out.
    • Two-component crackle was applied to the bottom and sides.

    • The outer lid, which had a rough surface, was painted with black acrylic paint.
    • White acrylic paint was applied to the areas where the crackle was applied so that fine cracks would appear.
    • Then, decoupage was done with images torn from a paper towel.
    • The images were perfected with acrylic paints,
    • The inside and outside of the iron were covered with a layer of water-based glaze applied with a brush.
    • Some points on the sides were highlighted with contour dots and messy lines on the upper surface.
    • Inside & outside the iron was covered with a layer of spray varnish.
    • Finally, felt was glued to the bottom so that the iron can be placed on furniture without damaging it.
    • The iron can be placed open & filled with aromatic potpourri.
    Powered By Blogger